Sign In | Join Free | My futurenowinc.com
futurenowinc.com
Guangzhou Tech master auto parts co.ltd
Guangzhou Tech Master Auto Parts Co.Ltd Tel: 86-020-36163613 Email:Info@tmcarparts.com Skype:joyce.cui50 Mobile:008618620791831(whatsapp)
Home > Hydraulic Hose Crimping Machine >

Mercedes Benz Crimping Machine For Air Suspension Springs Rubber Rings

Guangzhou Tech master auto parts co.ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Guangzhou Tech master auto parts co.ltd
City: Guangzhou
Province/State: Guangdong
Country/Region: China
Contact Person:Ms Joyce Cui

Mercedes Benz Crimping Machine For Air Suspension Springs Rubber Rings

Brand Name : Tech Master
Model Number : for all air suspension parts
Certification : TS16949
Place of Origin : china
MOQ : 1sets
Price : Negotiation
Payment Terms : T/T /western Union/paypal
Supply Ability : 100 sets per month
Delivery Time : 10 working days after received your payment
Packaging Details : Packed in carton firstly,and then reinforced with wooden case for outer packing
Contact Now

Mercedes benz crimping machine for air suspension rubber rings

Specification


Crimping force: 100T

Max opening: 175mm
Crimping range: 20mm-175mm
Acurracy: 0.05mm
Standard dies sets: 10 (size customized)
Voltage: 380V
Power: 4kw
System pressure: 30Mpa
Operate mode: auto, manual, pedal
Weight:250-300kg
Dimension: L850*W900*H1300mm
crimping way : Transverse withhold


Installation and Operation


1. Start-up


Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.


2. Regulating the scale


The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction), the scale can flexibly leave from the oil cylinder end cover. When releasing the scale, the scale will be recovered relying on spring force. Before the machine is turned on, inspect carefully if the scale telescoping is flexible and if the lead connection is reliable.


The primary scale is turned within 0 line of the secondary scale, turn the machine on for test run, and observe if all actions are normal. If when the piston conducts reciprocating movement, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.


3. Pressure regulation


The buckling pressure and opening mould pressure will be regulated through two knobs at the back of the oil cylinder, when it is regulated clockwise, the pressure will increase, when it is regulated anticlockwise, the pressure will decrease (The pressure has already been well regulated when ex-factory).


5. Operation


Based on the size of the rubber hose to be buckled, select suitable mould as per the technical parameter reference table of the locking pipe and mount it on the mould base. Regulated well the scale position as per the data in the data in the table, the pipe locking can be done. After pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve after buckling to see if it meets the reference table data of the parameter. If it does not meet the data, the scale shall be precisely regulated until it meets the requirements. Because the manufactures of the pipe sleeve are different, so, specific dimension, material, hardness etc are certainly not the same. These factors would result different influences on the pipe locking result, therefore, the data in the table is only for reference, the detailed data take the pressure test as the basis.

Notices


1. When buckling, make the joint to locate the mould center as much as possible, the joint is not buckled on the hex nut.

2. Prevent tool and other foreign matter from entering the locking head.

3. After the work is finished for each time, the eight-block mould base must be made to extend to the greatest extent, this can make the spring to be at extension status. If not, the spring will be damage.

4. When working, the hand should not stretch into the locking head.

5. The power supply must be switched off when maintenance is done.


This is our new hydraulic hose crimping machine, can crimp all types of hydraulic hoses:

1.Air spring crimping machine provided with die sets range for 1/4' to 1 1/4' ID hoses.


2.Double angular surface-swaging force up to 450T, powerful yet makes crimping easy.


3.Piston,Cylinder,All dies are wire cut after hardening and grinding.


4.Powder coating body give it a Futuristic sleek & stylish looks.


Air suspenison crimping machine photos.


Our Customers Normally Ask These Questions About the Machine:


1. What does this machine used for?

It can be used to repair or manufacture air suspensions, air aprings for cars and trucks. and aslo the industrial hydraulic hose pipes.


2. What is Voltage of this machine?

Original Voltage is 380V, but we can also make according to your requirements


3. Is it simple to learn to opearte this machine?

It is easy for operating. we will give detailed instruction and CD to show our customers how to operate


4. How to determine the dimensions of the die sets?

We process the die sets according to your dimensions or you tell us what products you want to crimp, then we can determine the size.


5. how are you going to package the machine to prevent damage during shipping?

we will pack the machine with strong wooden box with pallet to insure the safety of the machine during shipping.





Product Tags:

Hose Crimping Machine

      

Hydraulic Hose Crimp Machine

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Mercedes Benz Crimping Machine For Air Suspension Springs Rubber Rings Images

Inquiry Cart 0
Send your message to this supplier
 
From:
To: Guangzhou Tech master auto parts co.ltd
Subject:
Message:
Characters Remaining: (0/3000)
 

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2018 futurenowinc.com. All rights reserved.

京ICP备09074326